Secure cases on inclines and declines with the Intralox Series 1400 Square Friction Top belt.
This belt’s modules have a high-friction rubber surface that provides superior product grip without hindering sprockets or carryways. Available in grey polypropylene with black rubber or black polyethylene with black rubber, it uses plastic sprockets that resist wear and extend overall service life.
- 1-in (25.4-mm) pitch
- Closed surface prevents product loss
- Square pattern embedded in rubber modules increases grip strength
| in | mm | |
| Pitch | 1.00 | 25.4 |
| Minimum Width | 6 | 152 |
| Width Increments | 1.00 | 25.4 |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Fully flush edges.
- Available in grey polypropylene with black rubber and black polyethylene with black rubber.
- Slidelox are available in polypropylene or acetal.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Sprockets are all plastic.
- Most sprockets feature a split design, so shafts do not have to be removed for retrofits and changeovers.
- Robust design offers excellent belt and sprocket durability, especially in tough, material-handling applications.
- When using this belt on a center-drive conveyor, it can be necessary to retain the belt laterally, by placing collars at the backbend roller before the drive.
- Temperature, environmental conditions, and product characteristics affect the maximum degree of incline. Consider these factors when designing conveyor systems using these belts.
- Minimum nominal alternating edge indents: 2 in (51 mm) and 3 in (76 mm).
| Base Belt Material | Base/Friction Top | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | Friction Top Hardness | Agency Acceptability | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | FDA (USA) | EU MC1 | ||||
| Polypropylene | Grey/black | Nylon | 1,800 | 26,300 | 34 to 150 | 1 to 66 | 2.60 | 12.69 | 50 Shore A | 2 | |
| Polyethylene | Black/black | Nylon | 1,000 | 14,600 | -50 to 120 | -46 to 49 | 2.68 | 13.08 | 50 Shore A | 2 | |
European Migration Certificate providing approval for food contact according to EU Regulation 10/2011.
FDA compliant with restriction: Do not use in direct contact with fatty foods.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S1400_SquareFrictionTop_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 167 KB |
| S1400_SquareFrictionTop_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 172 KB |
