Mold to Width Oval Friction Top
Series 1400Prevent product slippage on inclines and declines with the Intralox Series 1400 Mold to Width Oval Friction Top belt.
This belt’s modules have a high-friction rubber surface that provides superior product grip on inclines and declines, saving valuable floor space. Available in grey polypropylene with black rubber, it uses plastic sprockets that resist wear and extend overall service life.
- 1-in (25.4-mm) pitch
- 6-in (152-mm) molded width
- Fully flush edges promote worker safety
- Oval-shaped rubber surface permits steeper inclines
| in | mm | |
| Pitch | 1.00 | 25.4 |
| Molded Width | 6 | 152 |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Fully flush edges.
- Available in grey polypropylene with black rubber.
- Slidelox are available in polypropylene or acetal.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Sprockets are all plastic.
- Most sprockets feature a split design, so shafts do not have to be removed for retrofits and changeovers.
- Up to three sprockets can be placed on the 6.0 in (152 mm) mold to width belt.
- Robust design offers excellent belt and sprocket durability, especially in tough, material-handling applications.
- When using this belt on a center-drive conveyor, it can be necessary to retain the belt laterally, by placing collars at the backbend roller before the drive.
- Temperature, environmental conditions, and product characteristics affect the effective maximum degree of incline. Consider these factors when designing conveyor systems to use these belts.
- Width tolerances: +0.000/-0.020 in (+0.000/-0.500 mm).
- Rubber indent: 1.0 in (25.4 mm).
- Available in 10 ft (3 m) increments.
| Base Belt Material | Base/Friction Top | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | Friction Top Hardness | Agency Acceptability | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| lbf | N | °F | °C | lb/ft | kg/m | FDA (USA) | EU MC1 | ||||
| Polypropylene | Grey/black | Nylon | 800 | 3,560 | 34 to 150 | 1 to 66 | 1.15 | 1.71 | 55 Shore A | 2 | |
European Migration Certificate providing approval for food contact according to EU Regulation 10/2011.
FDA compliant with restriction: Do not use in direct contact with fatty foods.
