Mold to Width Flat Top
Series 1400| in | mm | |
| Pitch | 1.00 | 25.4 |
| Molded Widths | 3.25 | 83 |
| 4.5 | 114 | |
| 6.0 | 152 | |
| 7.5 | 191 | |
| - | 85.0 | |
| Opening Size (approximate) | - | - |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth, closed surface with fully flush edges.
- Flat Top provides excellent lateral movement of containers. Ideal for container handling.
- Molded with robust tracking tabs to support the belt in heavy side-loading applications
- Slidelox are available in polypropylene or acetal.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Sprockets are all plastic.
- Most sprockets use a split design, so shafts do not have to be removed for retrofits and changeovers.
- Split sprockets are designed with thick, lug-style teeth for excellent durability and wear life.
- Robust design offers excellent belt and sprocket durability, especially in tough, glass applications.
- Sprocket placement:
- Use one sprocket on 3.25 in (83 mm) mold to width belts, and on 4.5 in (114 mm) tabbed mold to width belts.
- Use one or two sprockets on 4.5 in (114 mm) no tab mold to width belts.
- Use up to three sprockets on 6.0 in (152 mm) belts, and on 7.5 in (191 mm) mold to width belts.
- Optional tracking tabs fit into single barreled belt wearstrip with 1.75 in (44.5 mm) spacing.
- Width tolerances: +0.000/-0.020 in (+0.000/-0.500 mm).
- Available in 10 ft (3 m) increments.
| Belt Width | Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength1 | Temperature Range (continuous) | Belt Mass | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tab | No Tab | ||||||||||
| in | mm | lbf | N | °F | °C | lb/ft | kg/m | lb/ft | kg/m | ||
| 3.25 | 83 | Acetal | Nylon | 700 | 3,110 | -50 to 200 | -46 to 93 | 0.80 | 1.19 | 0.75 | 1.12 |
| – | 85 | Acetal | Nylon | 700 | 3,110 | -50 to 200 | -46 to 93 | 0.80 | 1.19 | – | – |
| 4.5 | 114 | Acetal | Nylon | 850 | 3,780 | -50 to 200 | -46 to 93 | 1.13 | 1.68 | 1.07 | 1.59 |
| 6.0 | 152 | Acetal | Nylon | 1,200 | 5,340 | -50 to 200 | -46 to 93 | 1.40 | 2.08 | 1.35 | 2.01 |
| 7.5 | 191 | Acetal | Nylon | 1,550 | 6,890 | -50 to 200 | -46 to 93 | 1.75 | 2.60 | 1.71 | 2.54 |
| 6.0 | 152 | Polypropylene | Nylon | 850 | 3,780 | 34 to 220 | 1 to 104 | 0.95 | 1.14 | 0.90 | 1.34 |
| 3.25 | 83 | HHR nylon | Nylon | 700 | 3,110 | -50 to 310 | -46 to 154 | 0.85 | 1.27 | – | – |
| 4.5 | 114 | HHR nylon | Nylon | 850 | 3,780 | -50 to 310 | -46 to 154 | 0.95 | 1.41 | 1.07 | 1.59 |
| 6.0 | 152 | HHR nylon | Nylon | 1,200 | 5,340 | -50 to 310 | -46 to 154 | 1.18 | 1.76 | 1.35 | 2.01 |
| 7.5 | 191 | HHR nylon | Nylon | 1,550 | 6,890 | -50 to 310 | -46 to 154 | 1.47 | 2.19 | 1.71 | 2.54 |
Ratings are based on non-tabbed belts using the maximum number of sprockets.
