Belt Finder

Flush Grid

Series 1400
Request a Quote
inmm
Pitch1.025.4
Minimum Width9229
Width Increments1.025.4
Opening Size (approximate)0.17 × 0.304.2 × 7.6
Open Area21%
Hinge StyleClosed
Rod Retention; Rod TypeSlidelox; unheaded

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Fully flush edges.
  • Polypropylene belts are grey with blue polypropylene Slidelox. Acetal belts are grey with yellow acetal Slidelox.
  • Slidelox are available in polypropylene or acetal.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • Minimum sprocket spacing: 3 in (76.2 mm).
  • Maximum recommended sprocket spacing: 6 in (152.4 mm).
  • Installation is the same as current S1400 belts, with the addition of a locked sprocket location chart and preferred run direction.
  • Recommended adjusted belt pull: greater than 900 lbf/ft (13,100 N/m).

Belt MaterialDefault Rod Material, Diameter 0.24 in (6.1 mm)Belt Strength1Temperature Range (continuous)Belt Mass
lbf/ftN/m°F°Clb/ft²kg/m²
PolypropylenePolypropylene1,80026,30034 to 2201 to 1041.617.86
PolypropyleneNylon1,80026,30034 to 2201 to 1041.668.10
AcetalNylon2,50036,500-50 to 200-46 to 932.5212.30

  1. Belt strength is divided by 2 when using 6 in (15.2 cm) sprocket spacing; full strength when using 3 in (7.6 cm) sprocket spacing.

Series 1400