| in | mm | |
| Pitch | 1.5 | 38.1 |
| Minimum Width | 24 | 609.6 |
| Maximum Width | 60 | 1,524 |
| Width Increments | 1.00 | 25.4 |
| Opening Size (approximate) | 1.1 x 0.42 | 27.9 x 10.7 |
| Open Area (fully extended) | 50% | |
| Minimum Open Area | 36% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- This belt has pinch points. See the Safety section in the Intralox Conveyor Belting Installation, Maintenance & Troubleshooting Manual for more information.
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Relatively uniform open area across the width of the belt aids product freezing and cooling.
- Robust edge feature adds strength to the outside edge of the belt.
- Belt openings pass straight through the belt to simplify cleaning.
- Lightweight, relatively strong belt with smooth surface grid.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Designed for low-tension, capstan drive spiral applications with a minimum turn radius of 1.6 times the belt width (measured from inside edge).
- Contact Intralox for a spiral analysis and the preferred run direction on spiral applications.
- Minimum sprocket indent from the inside belt edge and from the outside belt edge can vary. Contact Intralox Customer Service to determine exact placement.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Straight Belt Strength | Spiral Belt Strength1 | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | lbf | N | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Acetal | 1,600 | 23,400 | 475 | 2,110 | -50 to 200 | -46 to 93 | 1.60 | 7.81 |
| SELM | Acetal | 500 | 7,300 | 375 | 1,670 | -50 to 200 | -46 to 93 | 1.28 | 6.25 |
Published spiral belt strengths and their method of calculation vary among belt manufacturers. Please contact Intralox Customer Service for accurate comparison of spiral belt strengths.
