| in | mm | |
| Pitch | 2.0 | 50.8 |
| Minimum Width | 24 | 610 |
| Maximum Width | 60 | 1524 |
| Width Increments | 0.50 | 12.7 |
| Opening Size (approximate) | 0.38 x 0.64 | 9.5 x 16.5 |
| Open Area (fully extended) | 48% | |
| Minimum Open Area (2.7 TR) | 23% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- This belt has pinch points. See the Safety section in the Intralox Conveyor Belting Installation, Maintenance & Troubleshooting Manual for more information.
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Lightweight, relatively strong belt with smooth surface grid.
- Belt openings pass straight through the belt to simplify cleaning.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- When considering belt widths under 24 in (610 mm), contact Intralox Customer Service
- Contact Intralox Customer Service for preferred run direction on spiral applications.
- Designed for low-tension, capstan drive spiral applications with a minimum turn radius of 2.7 times the belt width (measured from inside edge).
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Straight Belt Strength | Spiral Belt Strength1 | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | lbf | N | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Acetal | 1,700 | 24,800 | 375 | 1,670 | -50 to 200 | -46 to 93 | 1.86 | 9.08 |
| Polypropylene | Acetal | 1,500 | 21,900 | 300 | 1,330 | 34 to 200 | 1 to 93 | 1.26 | 6.15 |
| SELM | Acetal | 1,060 | 15,500 | 300 | 1,330 | -50 to 200 | -46 to 93 | 1.44 | 7.03 |
Intralox engineers are available to provide an accurate comparison of spiral belt strengths. Contact Intralox Customer Service for more information.
