Solve common belt issues with the Intralox Series 2700 Spiral 2.2 belt.
Especially useful for smaller products like baked goods, this belt helps prevent unsanitary black specks which can form due to friction between rods and belts. Its modular plastic design ensures easy maintenance and cleanability, while its low-tension operation reduces premature belt wear and extends service life. A remarkable retrofit option for capstan drive systems, this belt elevates operations by protecting product quality and minimizing downtime.
- 2-in (50.8-mm) pitch
- Suitable for spiral and radius applications
- Large open area supports fast product cooling and freezing
- Minimum turn radius of 2.2 times belt width
| in | mm | |
| Pitch | 2.0 | 50.8 |
| Minimum Width | 24 | 610 |
| Maximum Width | 60 | 1524 |
| Width Increments | 0.50 | 12.7 |
| Opening Size (approximate) | 0.38 x 0.64 | 9.52 x 16.5 |
| Open Area (fully extended) | 48% | |
| Minimum Open Area (2.2 TR) | 23% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- This belt has pinch points. See the Safety section in the Intralox Conveyor Belting Installation, Maintenance & Troubleshooting Manual for more information.
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Lightweight, relatively strong belt with smooth surface grid.
- Belt openings pass straight through the belt to simplify cleaning.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Contact Intralox Customer Service for preferred run direction on spiral applications.
- When considering belt widths under 24 in (610 mm), contact Intralox Customer Service
- Designed for low-tension, capstan drive spiral applications with a minimum turn radius of 2.2 times the belt width (measured from inside edge).
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Straight Belt Strength | Spiral Belt Strength1 | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | lbf | N | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Acetal | 1,700 | 24,800 | 375 | 1,670 | -50 to 200 | -46 to 93 | 1.85 | 9.03 |
| Polypropylene | Acetal | 1,500 | 21,900 | 300 | 1,330 | 34 to 200 | 1 to 93 | 1.26 | 6.15 |
| SELM | Acetal | 1,060 | 15,500 | 300 | 1,330 | -50 to 200 | -46 to 93 | 1.44 | 7.03 |
Intralox engineers are available to provide an accurate comparison of spiral belt strengths. Contact Intralox Customer Service for more information.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S2700_FlushEdge_17-125inch_2.2TurnRatio_(Imperial).dxf | CAD Drawing | DXF | 2 MB |
| S2700_FlushEdge_17-125inch_2.2TurnRatio_(Metric).dxf | CAD Drawing | DXF | 2 MB |
| S2700_FlushEdge_8.875inch_2.2TurnRatio_(Imperial).dxf | CAD Drawing | DXF | 1 MB |
| S2700_FlushEdge_8.875inch_2.2TurnRatio_(Metric).dxf | CAD Drawing | DXF | 1 MB |
