Belt Finder

Spiral 1.6

Series 2700
Request a Quote
inmm
Pitch2.050.8
Minimum Width24610
Maximum Width601524
Width Increments0.5012.7
Opening Size (approximate)0.38 × 0.649.52 × 16.5
Open Area (fully extended)45%
Minimum Open Area (1.6 TR)27%
Hinge StyleOpen
Rod Retention; Rod TypeOccluded edge; unheaded

  • This belt has pinch points. See the Safety section in the Intralox Conveyor Belting Installation, Maintenance & Troubleshooting Manual for more information.
  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Lightweight, relatively strong belt with smooth surface grid.
  • Belt openings pass straight through the belt to simplify cleaning.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • When considering belt widths under 24 in (610 mm), contact Intralox Customer Service
  • Contact Intralox Customer Service for preferred run direction on spiral applications.
  • Designed for low-tension, capstan drive spiral applications with a minimum turn radius of 1.6 times the belt width (measured from inside edge).

Belt MaterialDefault Rod Material, Diameter 0.24 in (6.1 mm)Straight Belt StrengthSpiral Belt Strength1Temperature Range (continuous)Belt Mass
lbf/ftN/mlbfN°F°Clb/ft²kg/m²
AcetalAcetal1,70024,8003751,670-50 to 200-46 to 931.748.50
SELMAcetal1,06015,5003001,330-50 to 200-46 to 931.366.64

  1. Intralox engineers are available to provide an accurate comparison of spiral belt strengths. Contact Intralox Customer Service for more information.

Series 2700