| in | mm | |
| Module Pitch | 2.0 | 50.8 |
| Drive Tooth Pitch | 1.0 | 25.4 |
| Minimum Width | 10 | 254.0 |
| Maximum Width | 42 | 1067 |
| Width Increments | 0.50 | 12.7 |
| Opening Size (approximately) | 0.38 x 0.64 | 9.5 x 16.5 |
| Open Area | 44% | |
| Hinge Style | Open | |
- This belt has pinch points. See the Safety section in the Intralox Conveyor Belting Installation, Maintenance & Troubleshooting Manual for more information.
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Do not use in live-drum spiral conveyor systems.
- Flat belt surface allows for easier product transfer over the belt end.
- Teeth along the belt edge drive the belt and allow for atypical configurations and long conveyors without transfer points.
- The hold down tab location enables full use of the entire belt width.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Designed for side-driven applications with a minimum turn radius of 2.0 times the belt width (measured from inside edge to outer edge, including drive teeth).
- The Intralox Side Drive Program can help predict the strength requirements of most side-driven applications, ensuring that the belt is strong enough for the application. Contact Intralox Customer Service for more information.
- Contact Intralox for a spiral analysis and the preferred run direction on spiral applications.
- The distance between the belt edge (not including drive teeth) and the sprocket outer diameter is critical. Maintain this dimension to ensure proper sprocket engagement.
- For single-direction curve applications, a S2700 Spiral 1.6 module can be used on the inner edge to achieve a smaller turn ratio.
- Lane dividers can be used with this belt. Sideguards can be used on a 1.6 turn ratio belt but not the 2.0.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Straight Belt Strength | Curved Belt Strength1 | Temperature Range (continuous) | Belt Mass | Agency Acceptability | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | lbf | N | °F | °C | lb/ft² | kg/m² | FDA (USA) | EU MC2 | ||
| Acetal | Acetal | 200 | 2,920 | 150 | 667 | 40 to 200 | 4 to 93 | 2.17 | 10.6 | 3 | 3 |
Intralox engineers are available to provide an accurate comparison of spiral belt strengths. Contact Intralox Customer Service for more information.
European Migration Certificate providing approval for food contact according to EU Directive 2002/72/EC and all its amendments to date.
Fully compliant.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| Side Drive Technology Product Highlight | 182 KB |
