Flush Grid Nose-Roller Tight Turning with Edge Bearing
Series 2300Efficiently transport packaged goods in heavily loaded radius applications with the Intralox Series 2300 Flush Grid Nose-Roller Tight Turning with Edge Bearing belt.
This belt features an exceptional turn ratio that provides plant layout flexibility. It eliminates the need for dead plates and includes a Load-Sharing edge that distributes stress across modules to minimize fatigue failures.
- Minimum turn radius of 1.7 times belt width for widths up to 27 in (685.8 mm)
- Unheaded rod retention system eases maintenance
- Sprockets feature large lug teeth that extend sprocket life
- 0.75-in (19.1-mm) nose-roller transfers
- Stainless-steel edge bearings available for inside edges of turns
| in | mm | |
| Pitch | 1.00 | 25.4 |
| Minimum Width | 12.0 | 305 |
| Maximum Width | 36.0 | 914 |
| Width Increments | 3.0 | 76.2 |
| Maximum Opening Size (sphere) | 0.245 | 6.2 |
| Open Area | 28% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smaller opening size enhances belt safety.
- Edge bearings are stainless steel and are retained by stainless steel pins.
- Edge bearings are available on one side of the belt. Bearings must be placed on the inside edge of the turn, and must be configured in every other row of the belt.
- The underside design allows the belt to run smoothly around a 0.75 in (19.1 mm) nosebar.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Designed for sideflexing applications with a standard turn radius of 1.7 times belt width (measured from inside edge) for belt widths up to 27.0 in (686 mm). The standard turn radius is 1.75 times belt width for 30.0 in (762 mm) wide belts, 1.8 times belt width for 33-36.0 in (838-914 mm) wide belts.
- Minimum turn radius information is available in the S2300 Conveyor Design Guidelines. Contact Intralox Customer Service for more information.
- Belts can turn either clockwise or counterclockwise. Turn direction must be specified when ordering. Not available for S-turn applications.
- Detailed conveyor design guidelines are available. Contact Intralox Customer Service for more information.
- Use the Intralox® Engineering Program to determine if edge bearings are suitable for each application.
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Straight Belt Strength | Curved Belt Strength | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||||
| Acetal | Nylon | 900 | 13,100 | For curved belt strength calculations, contact Intralox Customer Service. | 0 to 200 | -17.8 to 93 | 2.40 | 11.72 | |
