Flush Grid Nose-Roller Dual Turning with Edge Bearing
Series 2300Efficiently transport packaged goods in applications that require both left and right turns with the Intralox Series 2300 Flush Grid Nose-Roller Dual Turning with Edge Bearing belt.
This belt accommodates 180-degree curves with ease. It eliminates the need for dead plates and includes a Load-Sharing edge that distributes stress across modules to minimize fatigue failures.
- Minimum turn radius of 2.2 times belt width for widths up to 27 in (685.8 mm)
- Ability to perform dual turns ensures optimal use of plant space
- Unheaded rod retention system eases maintenance
- Sprockets feature large lug teeth that extend sprocket life
- 0.75-in (19.1-mm) nose-roller transfers
- Stainless-steel edge bearings
| in | mm | |
| Pitch | 1.00 | 25.4 |
| Minimum Width | 12 | 305 |
| Maximum Width | 36 | 914 |
| Width Increments | 3.0 | 76.2 |
| Maximum Opening Size (sphere) | 0.245 | 6.2 |
| Open Area | 28% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Edge bearings are stainless steel and are retained by stainless steel pins.
- Edge bearings are on both sides of the belt and must be configured in every other belt row.
- The underside design allows the belt to run smoothly around a 0.75 in (19.1 mm) nosebar.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Designed for dual-turning applications.
- Designed for sideflexing applications with a minimum turn radius of 2.2 times the belt width (measured from the inside edge) for widths up to 27.0 in (686 mm). The standard turn radius is 2.3 times the belt width for 30-36.0 in (762-914 mm) wide belts.
- Minimum turn radius information is available in the S2300 Conveyor Design Guidelines. Contact Intralox Customer Service for more information.
- Detailed conveyor design guidelines are available. Contact Intralox Customer Service for more information.
- Before finalizing a conveyor design, use CalcLab to calculate the estimated belt pull and ensure the belt is strong enough for the application. To access CalcLab, go to calclab.intralox.com.
- Sprocket placement: every 3.00 in (76.2 mm) from the outer edge, except the drive pocket nearest the flush edge. The drive pocket nearest the flush edge is 3.75 in (95.3 mm) from the belt edge.
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Straight Belt Strength | Curved Belt Strength | Temperature Range (continuous) | Belt Mass | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||||||||
| Acetal | Nylon | 900 | 13,100 | For curved belt strength calculations, contact Intralox Customer Service. | -50 to 200 | -46 to 93 | 2.40 | 11.72 | |||||
