Flush Grid Mold to Width Nose-Roller Dual Turning
Series 2300Efficiently transport packaged goods in applications that require both left and right turns with the Intralox Series 2300 Flush Grid Mold to Width Nose-Roller Dual Turning belt.
This belt accommodates 180-degree curves with ease. It eliminates the need for dead plates and includes a Load-Sharing edge that distributes stress across modules to minimize fatigue failures.
- Minimum turn radius of 2.2 times belt width
- Ability to perform dual turns ensures optimal use of plant space
- Unheaded rod retention system eases maintenance
- Sprockets feature large lug teeth that extend sprocket life
- 0.75-in (19.1-mm) nose-roller transfers
- Available in 6-in (152.4-mm) and 9-in (228.6-mm) belt widths
| in | mm | |
| Pitch | 1.00 | 25.4 |
| Minimum Width | 6.0 | 152.4 |
| Opening Size (Sphere) | 0.245 | 6.2 |
| Open Area | 28% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Snap-lock; headed | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Flush edge design features an extension to reduce the opening size.
- Sprockets have large lug teeth that enhance sprocket life.
- Flush edge or tab edge available.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Designed for sideflexing applications with a standard turn ratio of 2.2 times the belt width (measured from inside edge).
- Use the Intralox Engineering Program to determine the strength requirement of most radius applications and ensure the belt is strong enough for the application.
- Intralox recommends using Dynamic Nose-Rollers in tight transfer applications.
- Detailed conveyor design guidelines are available. Contact Intralox Customer Service for more information.
- Minimum nose-roller diameter: 0.75 in (19.1 mm).
- Available widths: 6 in (152.4 mm) and 9 in (228.6 mm).
- Required number of sprockets:
- 6 in (152.4 mm) belts: two sprockets. Avoid split sprockets. These sprockets do not fit on a 6 in (152.4 mm) wide belt.
- 9 in (228.6 mm) belts: two sprockets. Split sprockets can be used.
- Tab edge belt measurement does not include tabs. Tabs extend approximately 0.3 in (8 mm) x 0.24 in (6 mm) on each side of belt, inside the wearstrip.
| Belt Width | Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Straight Belt Strength | Curved Belt Strength | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| lbf | N | °F | °C | lb/ft | kg/m | |||||
| in | mm | |||||||||
| 6 | 152.4 | Acetal | Nylon | 700 | 3,110 | For curved belt strength calculations, contact Intralox Customer Service. | -50 to 200 | -46 to 93 | 1.20 | 1.79 |
| 9 | 228.6 | Acetal | Nylon | 700 | 3,110 | -50 to 200 | -46 to 93 | 1.80 | 2.68 | |
