Radius Flush Grid High Deck
Series 2200| in | mm | |
| Pitch | 1.50 | 38.1 |
| Minimum Width | 6 | 152 |
| Width Increments | 1.00 | 25.4 |
| Opening Size (approximate) | 0.50 × 0.75 | 12.7 × 19.7 |
| Open Area | 50% | |
| Product Contact Area | 37% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- This belt has pinch points. See the Safety section in the Intralox Conveyor Belting Installation, Maintenance & Troubleshooting Manual for more information.
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Makes turns with an inside radius of 2.2 times the belt width.
- Provides more beam strength than the standard S2200 belt. This feature can reduce retrofit costs in spirals.
- Uses standard S2200 wearstrips.
- If a standard edge or tabbed edge wearstrip is used to hold the belt in place, do not retain sprockets on the shaft. In this case, the wearstrip maintains the lateral belt position.
- 0.5 in (12.7 mm) higher than the standard S2200 belt.
- Standard indent: 1.25 in (31.8 mm).
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Straight Belt Strength1 | Curved Belt Strength | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||||
| Acetal | Nylon | 2,500 | 36,500 | For curved belt strength calculations, contact Intralox Customer Service. | -50 to 200 | -46 to 93 | 3.66 | 17.87 | |
| Polypropylene | Acetal | 1,600 | 23,400 | 34 to 200 | 1 to 93 | 2.41 | 11.77 | ||
When using polyurethane sprockets, the belt strength for belts rated over 750 lbf/ft (10,900 N/m) is de-rated to 750 lbf/ft (10,900 N/m). All other belts maintain their published rating. The temperature range for polyurethane sprockets is 0°F to 120°F (-18°C to 49°C). Contact Intralox Customer Service for availability of polyurethane sprockets.
