Overcome difficult conditions in harsh applications like potato receiving or dip tank lines with our reliable, low-maintenance solution.
Using abrasion-resistant hinges, rods, and sprockets, the Intralox Series 1700 Flush Grid belt extends service life and reduces maintenance costs through its durable construction. Its 37% open area provides efficient drainage of fluids such as slurry or wash water, while its linear and predictable pitch growth prevents unscheduled downtime.
- Slidelox rod retention system eases maintenance
- Double-rod design replaces sliding friction between hinges and modules with rolling friction, significantly reducing wear
- Available in Low Wear Plus material for superior wear resistance
| in | mm | |
| Pitch | 1.50 | 38.1 |
| Minimum Width | 5 | 127 |
| Width Increments | 1.00 | 25.4 |
| Opening Size (approximate) | 0.62 × 0.50 | 15.7 × 12.7 |
| 0.70 × 0.26 | 17.8 × 6.6 | |
| Open Area | 37% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Fully flush edges.
- Slidelox are highly visible, orange acetal.
- Multi-rod hinge design significantly reduces cam shaft requirements. Every row contains two rectangular rods.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Ultra-abrasion-resistant polyurethane sprockets with large lug teeth.
- Abrasion resistant system lasts 2.5 to 3 times longer than conventional modular plastic belts.
- Provides excellent belt and sprocket durability, especially in tough material-handling applications.
- Conveyor requirements: Intralox recommends steel carryways with either a chevron pattern or a flat continuous carryway. Do not use straight, parallel wearstrips. Do not use on pusher conveyors.
| Belt Material | Default Rod Material 0.25 × 0.17 in (6.4 × 4.3 mm) | Belt Strength | Temperature Range (continuous)1 | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| AR nylon | Nylon | 1,800 | 26,300 | -50 to 240 | -46 to 116 | 2.21 | 10.78 |
| Detectable nylon | Nylon | 1,500 | 21,900 | -50 to 180 | -46 to 82 | 2.28 | 11.13 |
| Low Wear Plus | Low Wear Plus | 500 | 7,300 | 0 to 120 | -18 to 49 | 2.56 | 12.50 |
Sprocket temperatures must be limited to -40°F to 160°F (-40°C to 70°C). Belt used in temperature range of 212°F to 240°F (100°C to 116°C) are not FDA-compliant.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S1700_FlushGrid_FlushEdge_4inch_(Imperial).dxf | CAD Drawing | DXF | 146 KB |
| S1700_FlushGrid_FlushEdge_4inch_(Metric).dxf | CAD Drawing | DXF | 158 KB |
| S1700_FlushGrid_FlushEdge_6inch_(Imperial).dxf | CAD Drawing | DXF | 188 KB |
| S1700_FlushGrid_FlushEdge_6inch_(Metric).dxf | CAD Drawing | DXF | 205 KB |
| S1700_FlushGrid_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 166 KB |
| S1700_FlushGrid_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 182 KB |
| Series 1750 and 1700 Abrasion Resistant Product Highlight | 634 KB |
