| in | mm | |
| Pitch | 1.00 | 25.4 |
| Minimum Width | 5 | 127 |
| Maximum Width | 60 | 1524 |
| Width Increments | 0.50 | 12.7 |
| Opening Size (approximate) | 0.20 x 0.16 | 5.1 x 4.1 |
| Open Area | 28% | |
| Minimum Open Area | n/a | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Fully sculpted and radiused corners with no pockets or sharp corners to catch and hold debris.
- Open area is designed to limit water film formation and maximize water drainage.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Like S800 and S1800, the drive bar on the underside of this belt channels water and debris to the outside of the belt for easier, faster cleanup. Drive bar effectiveness is proven both in-house and in field tests.
- Standard indent: 1 in (25.4 mm).
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Polypropylene | 800 | 11,700 | 34 to 200 | 1 to 93 | 1.32 | 6.44 |
| Polypropylene | Polypropylene | 400 | 5,840 | 34 to 220 | 1 to 104 | 0.89 | 4.35 |
| Polyethylene | Polyethylene | 200 | 2,920 | -50 to 150 | -46 to 66 | 0.92 | 4.49 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| PK Belt Material Product Highlight | 444 KB |
