Simplify sanitation with the Intralox Series 1600 Open Hinge Flat Top belt.
The S1600 Open Hinge Flat Top belt pairs cleanability with flexibility to meet the high hygienic standards present in food-processing applications. Its open hinge design exposes more hinge and rod area for streamlined cleaning and reduced risk of debris harborage.
- 1-in (25.4-mm) pitch version of S800 belting
- Sculpted, radius corners minimize debris-trapping areas
- Drive bar on its underside guides water and debris away from the belt
| in | mm | |
| Pitch (nominal) | 1.00 | 25.4 |
| Minimum Width | 5 | 127 |
| Width Increments | 0.50 | 12.7 |
| Opening Size (approximate) | — | — |
| Open Area | 0% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth, closed upper surface with fully flush edges.
- Fully sculpted and radius corners.
- No pockets or sharp corners to catch and hold debris.
- Cam-link hinges provide easy cleaning with greater hinge and rod exposure as the belt moves around the sprockets. This exclusive Intralox feature allows unsurpassed cleaning access to this area.
- The drive bar on the underside of this belt channels water and debris to the outside of the belt for easier, faster cleanup. Drive bar effectiveness is proven both in-house and in field tests.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- No-Cling flights are available.
- Standard flight height: 4 in (102 mm).
- Custom flight heights are available. Contact Intralox Customer Service for more information.
- For certain food-safe applications, a ThermoDrive belt may offer superior cleanability and product yield. See the ThermoDrive Technology Engineering Manual for more information.
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene | Polypropylene | 700 | 10,200 | 34 to 220 | 1 to 104 | 1.05 | 5.13 |
| Polyethylene | Polyethylene | 350 | 5,110 | -50 to 150 | -46 to 66 | 1.10 | 5.37 |
| Acetal | Polypropylene | 1,400 | 20,400 | 34 to 200 | 1 to 93 | 1.58 | 7.71 |
| Acetal | Polyethylene1 | 1,000 | 14,600 | -50 to 150 | -46 to 66 | 1.58 | 7.71 |
| Hi-Temp | Hi-Temp | 1,000 | 14,600 | 70 to 400 | 21 to 204 | 1.54 | 7.52 |
| X-ray detectable acetal2 | X-ray detectable acetal | 1,000 | 14,600 | -50 to 150 | -46 to 66 | 1.92 | 9.35 |
| PK | PK | 1,000 | 14,600 | -40 to 176 | -40 to 80 | 1.39 | 6.79 |
Polyethylene rods can be used in cold applications when impacts or sudden starts/stops occur. Please note lower rating.
Designed specifically for detection by X-ray machines.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| PK Belt Material Product Highlight | 444 KB |
