Mold to Width Open Hinge Flat Top
Series 1600| in | mm | |
| Pitch | 1.00 | 25.4 |
| Molded Width | 7.5 | 190.5 |
| Open Area | 0% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Snap-lock; headed | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth, closed upper surface with fully flush edges.
- Molded with robust tracking tabs to support the belt in heavy side-loading applications
- Uses recessed rods.
- Available in 10 ft (3 m) increments.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Do not use with sprockets smaller than a 3.9 in (99 mm) diameter (12 tooth) sprocket.
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf | N | °F | °C | lb/ft | kg/m | ||
| Acetal | Polyethylene | 625 | 2,780 | -50 to 150 | -46 to 66 | 1.02 | 1.52 |
