| in | mm | |
| Pitch (nominal) | 1.00 | 25.4 |
| Minimum Width | 5 | 127 |
| Width Increments | 0.50 | 12.7 |
| Opening Size (approximate) | — | — |
| Open Area | 0% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Closed upper surface with fully flush edges.
- Fully sculpted and radiused corners with no pockets or sharp corners to catch and hold debris.
- Cam-link hinges provide easy cleaning with greater hinge and rod exposure as the belt moves around the sprockets. This exclusive Intralox feature allows unsurpassed cleaning access to this area.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- The drive bar on the underside of this belt channels water and debris to the outside of the belt for easier, faster cleanup. Drive bar effectiveness is proven both in-house and in field tests.
- Detailed material information is provided in Product Line.
- 0.16 in (4 mm) Mini Rib on surface accommodates gradual inclines and declines. Not recommended for product accumulation applications.
- No-Cling flights are available.
- Standard flight height: 4 in (102 mm).
- Custom flight heights are available. Contact Intralox Customer Service for more information.
- Minimum nominal alternating edge indents: 1.5 in (38 mm) and 2.5 in (63 mm).
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene | Polypropylene | 700 | 10,200 | 34 to 220 | 1 to 104 | 1.135 | 5.54 |
| Acetal | Polypropylene | 1,400 | 20,400 | 34 to 200 | 1 to 93 | 1.705 | 8.32 |
