Achieve seamless product transfers with the Intralox Series 1200 Raised Rib belt.
This belt has raised surface ribs designed to engage with finger transfer plates, which ensure continuous product flow. Its 0.75-in (19.1-mm) thick modules enable heavy load transport, while its polypropylene composite material provides up to 3,300 lb/ft (48,200 N/m) of pulling power.
- 1.44-in (36.6-mm) pitch
- Polypropylene composite material minimizes belt elongation from thermal expansion
- Available with easy-to-install plastic or stainless-steel split sprockets
| in | mm | |
| Pitch | 1.44 | 36.6 |
| Minimum Width | 6 | 152 |
| Width Increments | 1.00 | 25.4 |
| Open Area | 24% | |
| Product Contact Area | 24% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Made of engineered resin for increased stiffness and minimal belt elongation through thermal expansion.
- Slidelox are glass-reinforced polypropylene.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Belt strength depends on the run direction. When the belt is not installed in the preferred run direction, the belt strength is reduced by half.
- Molded split plastic sprockets available for easy installation.
- Module thickness: 1.0 in (25.4 mm), which provides superior belt strength and stiffness.
| Belt Material | Default Rod Material, Diameter 0.31 in (7.9 mm) | Belt Strength1 | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene composite | Polypropylene | 3,300 | 48,200 | 34 to 220 | 1 to 104 | 3.3 | 16.11 |
Belt strength rating depends on preferred belt run direction. If run in the opposite direction, the belt rating is 2000 lbf/ft (29,000 N/m).
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S1200_RaisedRib_FlushEdge_A_6inch_(Imperial).dxf | CAD Drawing | DXF | 777 KB |
| S1200_RaisedRib_FlushEdge_A_6inch_(Metric).dxf | CAD Drawing | DXF | 777 KB |
| S1200_RaisedRib_FlushEdge_A_7inch_(Imperial).dxf | CAD Drawing | DXF | 843 KB |
| S1200_RaisedRib_FlushEdge_A_7inch_(Metric).dxf | CAD Drawing | DXF | 843 KB |
| S1200_RaisedRib_FlushEdge_B_6inch_(Imperial).dxf | CAD Drawing | DXF | 815 KB |
| S1200_RaisedRib_FlushEdge_B_6inch_(Metric).dxf | CAD Drawing | DXF | 815 KB |
| S1200_RaisedRib_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 789 KB |
| S1200_RaisedRib_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 789 KB |








