Elevate worker safety in industrial applications with our PeopleVeyor solution.
Used especially on assembly lines, the Intralox Series 1200 Non Skid Raised Rib belt features a tread surface pattern that reduces operator slippage risks. By improving ergonomics and workflows, this belt offers measurable benefits for both employees and production.
- 0.75-in (19.1-mm) thick modules provide robust belt strength and stiffness
- Polypropylene composite material minimizes belt elongation from thermal expansion
- Available with easy-to-install plastic or stainless-steel split sprockets
- Compatible with finger plates to remove dropped fasteners or other debris
| in | mm | |
| Pitch | 1.44 | 36.6 |
| Minimum Width | 6 | 152 |
| Width Increments | 1.00 | 25.4 |
| Opening Size | - | - |
| Open Area | 0% | |
| Product Contact Area | 10% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Tread pattern provides a non-skid walking surface to increase safety.
- Staggered yellow edges make it easy to distinguish the moving belt from the stationary floor.
- Slidelox are glass-reinforced polypropylene.
- Made of engineered resin for increased stiffness and minimal belt elongation through thermal expansion. Engineered resin is a static dissipative material that does not rely on moisture to dissipate a charge, so it is effective in all environments.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Belt strength depends on the run direction. When the belt is not installed in the preferred run direction, the belt strength is reduced by half.
- Not recommended for product accumulation conditions.
- For information about friction values between product and belt, contact Intralox Customer Service
- 1.44 in (36.6 mm) pitch allows use of smaller drive sprockets than traditional moving-platform belts, providing tighter transfers and requiring shallower floor trenches for installation.
- Rib indent: 1.0 in (25 mm).
| Belt Material | Default Rod Material, Diameter 0.31 in (7.9 mm) | Belt Strength1 | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| EC polypropylene composite | Polypropylene composite | 4,000 | 58,400 | -20 to 220 | -29 to 104 | 3.58 | 17.48 |
| UV-resistant acetal2 | Acetal | 2,500 | 36,500 | -50 to 150 | -46 to 66 | 4.51 | 22.02 |
Belt strength rating depends on preferred belt run direction. If run in the opposite direction, the belt rating is 2,000 lbf/ft (29,000 N/m). The belt strength for narrow belts is reduced to 3,750 lbf/ft (54,700 N/m) for belt widths under 60 in (1,524 mm), 3,250 lbf/ft (47,400 N/m) for belt widths under 30 in (762 mm), and 2,750 lbf/ft (40,100 N/m) for belt widths under 12 in (305 mm). Contact Intralox Customer Service if a more precise belt strength is required for belt widths under 60 in (1,524 mm).
UV-resistant acetal requires special sprockets. Contact Intralox Customer Service when ordering sprockets for this belt.
