Move heavy loads confidently with our powerful, dependable belting.
The Intralox Series 1200 Flat Top belt has 0.75-in (19.1-mm) thick modules to easily accommodate heavy loads like pallets. Its polypropylene composite material provides up to 4,000 lb/ft (58,400 N/m) of pulling power—sufficient for most industrial applications.
- Closed surface prevents product loss
- Polypropylene composite material minimizes belt elongation from thermal expansion
- Available with easy-to-install plastic or stainless-steel split sprockets
| in | mm | |
| Pitch | 1.44 | 36.6 |
| Minimum Width | 6 | 152 |
| Width Increments | 1.00 | 25.4 |
| Opening Size (approximate) | - | - |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Module thickness is 0.75 in (19.1 mm), which provides superior belt strength and stiffness.
- Made of engineered resin for increased stiffness and minimal belt elongation through thermal expansion.
- Slidelox are glass-reinforced polypropylene.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Molded split plastic sprockets available for easy installation.
- Belt strength depends on the run direction. When the belt is not installed in the preferred run direction, the belt strength is reduced by half.
- Belt strength for narrow belts:
- 3,750 lbf/ft (54,700 N/m) for belt widths under 60 in (1,524 mm). Contact Intralox Customer Service if a more precise belt strength is required.
- 3,250 lbf/ft (47,400 N/m) for belt widths under 30 in (762 mm)
- 2,750 lbf/ft (40,100 N/m) for belt widths under 12 in (305 mm)
| Belt Material | Default Rod Material, Diameter 0.31 in (7.9 mm) | Belt Strength1 | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene composite | Polypropylene composite | 4,000 | 58,400 | -20 to 220 | -29 to 104 | 3.17 | 15.45 |
| EC polypropylene composite | Polypropylene composite | 4,000 | 58,400 | -20 to 220 | -29 to 104 | 3.2 | 15.66 |
Belt strength rating depends on preferred belt run direction. If run in the opposite direction, the belt rating is 2,000 lbf/ft (29,000 N/m). The belt strength for narrow belts is reduced to 3,750 lbf/ft (54,700 N/m) for belt widths under 60 in (1524 mm), 3,250 lbf/ft (47,400 N/m) for belt widths under 30 in (762 mm), and 2,750 lbf/ft (40,100 N/m) for belt widths under 12 in (305 mm). Contact Intralox Customer Service if a more precise belt strength is required for belt widths under 60 in (1,524 mm).
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S1200_FlatTop_FlushEdge_A_6inch_(Imperial).dxf | CAD Drawing | DXF | 233 KB |
| S1200_FlatTop_FlushEdge_A_6inch_(Metric).dxf | CAD Drawing | DXF | 244 KB |
| S1200_FlatTop_FlushEdge_A_7inch_(Imperial).dxf | CAD Drawing | DXF | 304 KB |
| S1200_FlatTop_FlushEdge_A_7inch_(Metric).dxf | CAD Drawing | DXF | 329 KB |
| S1200_FlatTop_FlushEdge_B_6inch_(Imperial).dxf | CAD Drawing | DXF | 294 KB |
| S1200_FlatTop_FlushEdge_B_6inch_(Metric).dxf | CAD Drawing | DXF | 317 KB |
| S1200_FlatTop_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 219 KB |
| S1200_FlatTop_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 236 KB |
