Achieve seamless container transfers with the Intralox Series 1100 Perforated Flat Top belt.
Used especially in canmaking, the S1100 Perforated Flat Top belt features round perforations for superior performance in high-speed vacuum applications. Its small pitch enables tight transfers, while its hole pattern ensures consistent can spacing.
- 5/32-in (4-mm) diameter perforations
- 0.60-in (15.2-mm) pitch reduces chordal action
- 0.875-in (22.2-mm) diameter nosebars
| in | mm | |
| Pitch | 0.60 | 15.2 |
| Minimum Width | 3 | 76 |
| Width Increments | 1.00 | 25.4 |
| Opening Size | - | - |
| Open Area | See Product Notes. | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- 5.3% open area includes 2.1% open area at the hinge.
- Available with 5/32 in (4 mm) round perforations on a nominal 1 in (25.4 mm) × 0.6 in (15.2 mm) perforation pattern.
- Underside design and small pitch allow the belt to run smoothly around nosebars.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- For information regarding sprocket placement, see the center sprocket offset table in Locked Sprocket Position on Shaft.
- Can be used over 0.875 in (22.2 mm) diameter nosebar for tight transfers. See Tight-Transfer Methods for more information.
- For use on vacuum applications requiring tight, end-to-end transfers.
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Polypropylene | 1,000 | 14,600 | 34 to 200 | 1 to 93 | 1.30 | 6.35 |
| Acetal1 | Polyethylene | 900 | 13,100 | -50 to 70 | -46 to 21 | 1.30 | 6.35 |
Polyethylene rods can be used in cold applications when impacts or sudden starts/stops occur. Please note lower rating.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S1100_PerforatedFlatTop_FlushEdge_2inch_(Imperial).dxf | CAD Drawing | DXF | 1 MB |
| S1100_PerforatedFlatTop_FlushEdge_2inch_(Metric).dxf | CAD Drawing | DXF | 2 MB |
| S1100_PerforatedFlatTop_FlushEdge_4inch_(Imperial).dxf | CAD Drawing | DXF | 3 MB |
| S1100_PerforatedFlatTop_FlushEdge_4inch_(Metric).dxf | CAD Drawing | DXF | 4 MB |
| S1100_PerforatedFlatTop_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 6 MB |
| S1100_PerforatedFlatTop_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 6 MB |
