Belt Finder

Embedded Diamond Top

Series 1100
Request a Quote

Support efficient release of food products with our nonstick belting.

The Intralox Series 1100 Embedded Diamond Top belt features a specialized surface pattern that ensures easy release of sticky products like dough. Designed for food-processing applications, it offers a small pitch for tight transfers.

  • Closed surface prevents product loss
  • 0.60-in (15.2-mm) pitch reduces chordal action
  • 0.875-in (22.2-mm) diameter nosebars
inmm
Pitch0.6015.2
Minimum Width376
Width Increments1.0025.4
Opening Size--
Open Area0%
Hinge StyleOpen
Rod Retention; Rod TypeOccluded edge; unheaded

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Lightweight with smooth, closed surface grid.
  • Small pitch reduces chordal action and the gap required at the transfer dead plate.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • For information regarding sprocket placement, see the center sprocket offset table in Locked Sprocket Position on Shaft.
  • Can be used over 0.875 in (22.2 mm) diameter nosebar for tight transfers.

Belt MaterialDefault Rod Material, Diameter 0.18 in (4.6 mm)Belt Strength1Temperature Range (continuous)Belt Mass
lbf/ftN/m°F°Clb/ft²kg/m²
PolyethylenePolyethylene3004,380-50 to 150-46 to 660.964.69

  1. When using steel sprockets, the belt strength for polyethylene is 240 lbf/ft (3,400 N/m).

Series 1100