Stabilize food products on slight inclines and declines with the Intralox Series 1100 Cone Top belt.
The S1100 Cone Top belt features raised cones that ensure proper product orientation and a small pitch that allows for tight transfers. Built for food-processing applications, it improves throughput by minimizing product loss.
- 0.125-in (3.2-mm) raised cones
- 0.60-in (15.2-mm) pitch reduces chordal action
- 0.875-in (22.2-mm) diameter nosebars
| in | mm | |
| Pitch | 0.60 | 15.2 |
| Minimum Width | 9 | 229 |
| Width Increments | 1.00 | 25.4 |
| Opening Size | - | - |
| Open Area | 0% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Small pitch reduces chordal action and the gap required at the transfer dead plate.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- For information regarding sprocket placement, see the center sprocket offset table in Locked Sprocket Position on Shaft.
- Can be used over 0.875 in (22.2 mm) diameter nosebar for tight transfers.
- Minimum nominal alternating edge indents: 2 in (51 mm) and 3 in (76 mm).
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Polypropylene | 1,000 | 14,600 | 34 to 200 | 1 to 93 | 1.31 | 6.40 |
| HR nylon | Nylon | 500 | 7,300 | -50 to 240 | -46 to 116 | 1.18 | 5.76 |
