S8126 Flat Top (6.0 mm) Polyurethane
Series 8126Achieve the highest hygienic standards in a variety of direct food–contact applications with the Intralox Series 8126 Flat Top (6.0 mm) belt in polyurethane.
Part of our LugDrive product line, this belting minimizes sink marks for improved yield. It’s an easy drop-in replacement for existing lug-driven belts that delivers an advanced hygienic solution without sacrificing consistency or quality.
Engineered with versatility in mind, the belt is made of a wear-resistant, easy-to-clean polyurethane material. Its smooth surface is ideal for scraper-critical applications. Available in blue, this belt reliably performs within a continuous temperature range of 20°F to 140°F (-7°C to 60°C).
- Homogeneous thermoplastic structure streamlines installation
- Lightweight, hinge-free belting improves sanitation
- Seamless retrofit for certain high-tension, troughed conveyor applications
| in | mm | ||||
| Pitch | 1.004 | 25.50 | |||
| Overall Thickness | 0.236 | 6.0 | |||
| Minimum Width | 10 | 254 | |||
| Maximum Width | 24 | 610 | |||
| Minimum Backbend Diameter | 4.0 | 102 | |||
| Minimum Sprocket Diameter (12T) | 4.0 | 102 | |||
| Open Area (seamless surface) | 0% | ||||
| Available Joining Options | prepared ends, endless | ||||
| Available Colors | blue | ||||
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Engineered matte surface is optimized for efficient product release and cleanability.
- Designed for retrofitting certain high tension troughed conveyor applications to tensionless ThermoDrive solutions; contact Intralox Customer Service for details.
- For use with S8126-specific drive and idle components.
- Drive lug width is 2.4 in (62 mm).
- See Material Compliance for compliance details.
| Belt Material | Maximum Belt Pull Capability | Temperature Range (continuous)1 | Belt Weight | ||||||
|---|---|---|---|---|---|---|---|---|---|
| lbf | N | °F | °C | lb/ft2 | kg/m2 | ||||
| Polyurethane | 120 | 534 | 20 to 140 | -7 to 60 | 0.62 | 3.04 | |||
Polyurethane exhibits increased stiffness at temperatures below 40°F (5°C). Not recommended for applications requiring small component diameters with operating temperatures below 40°F (5°C).
