| in | mm | |
| Pitch | 2.50 | 63.5 |
| Minimum Width | 5 | 127 |
| Width Increments | 1.00 | 25.4 |
| Opening Size (approximate) | 0.07 × 0.75 | 1.7 × 19.1 |
| Open Area | 32% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Fully flush edges with recessed rods prevent edge damage and rod migration.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Flights and other accessories are available.
- Compatible with Intralox belt tensioners. See Intralox Belt Tensioners for more information.
| Belt Material | Default Rod Material, Diameter 0.31 in (7.9 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene | Polypropylene | 800 | 11,700 | 34 to 220 | 1 to 104 | 1.44 | 7.03 |
| UV resistant acetal | Acetal | 1,500 | 21,900 | -50 to 200 | -46 to 93 | 2.27 | 11.08 |
| Polyethylene | Polyethylene | 400 | 5,840 | -50 to 150 | -46 to 66 | 1.50 | 7.32 |
| Nylon | Nylon | 1,000 | 14,600 | -50 to 240 | -46 to 116 | 1.81 | 8.84 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S1800_MeshTop_FlushEdge_6inch_(Imperial).dxf | CAD Drawing | DXF | 884 KB |
| S1800_MeshTop_FlushEdge_6inch_(Metric).dxf | CAD Drawing | DXF | 959 KB |
| S1800_MeshTop_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 988 KB |
| S1800_MeshTop_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 1 MB |
