Flush Grid

Series 1750

Reduce unscheduled downtime and extend service life in abrasive receiving and dewatering applications with the Intralox Series 1750 Flush Grid belt.

Used especially in tomato and potato receiving, this belt features a patented semicircle rod design that significantly reduces rod wear and pitch elongation. Its large, uniform openings support high-volume water flow and efficient drainage, while its durable construction ensures reliability throughout production cycles.

Slidelox rod retention system eases maintenance
Stainless-steel rods prolong belt life and strengthen beams
21% open area accelerates drainage
Available in Low Wear Plus material for superior wear resistance
Available in Low Moisture Abrasion Resistant (LMAR) material for high-temperature environments up to 290°F (143°C)

	in	mm
Pitch	1.52	38.6
Minimum Width	12	304.8
Maximum Width	120	3048
Width Increments	1.00	25.4
Opening Size (approximate)	0.66 x 0.53	16.7 x 13.5
Open Area	21%
Hinge Style	Closed
Rod Retention; Rod Type	Slidelox; unheaded

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Fully flush edges.
Highly visible Slidelox rod retention feature.
Large belt openings allow high-volume water flow and drainage.
Semi-circle rod design significantly reduces rod wear and pitch elongation, and delivers predictable performance for maintenance planning in tough applications.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Ultra-abrasion-resistant polyurethane sprockets. Sprockets have large lug teeth that provide reliable engagement, extend sprocket life, and clear debris from the drive pockets.
Provides excellent belt and sprocket durability, especially in tough-material handling applications.
Conveyor requirements: Intralox recommends steel carryways in either a chevron pattern or a flat continuous carryway. Do not use straight, parallel wearstrips. Do not use on pusher conveyors.
For specific conveyor design guidelines, contact Intralox Customer Service.

Belt Material	Default Rod Material 0.5 in (12.5 mm) Half Round	Belt Strength		Temperature Range (continuous)		Belt Mass
Belt Material	Default Rod Material 0.5 in (12.5 mm) Half Round	lbf/ft	N/m	°F	°C	lb/ft²	kg/m²
Low Wear Plus	Stainless steel	1,200	17,500	0 to 120	-18 to 49	7.10	34.66
LMAR	Stainless steel	1,800	26,300	0 to 212	-18 to 100	6.73	32.86