Achieve superior product cooling with the Intralox Series 1500 Flush Grid belt.
Widely used by tortilla manufacturers, this belt excels in cooling tunnels, outperforming and outlasting conventional wire belts. Its large open area and minimal thickness enhance airflow and cooling speed, while its robust construction guarantees long-lasting operation.
- Lightweight design ensures easy handling
- Smooth upper surface with fully flush edges
- Compatible with 0.5-in (12.7-mm) diameter nosebar
- Available in multiple materials for diverse conditions, including heat-resistant (HR) and High Heat Resistant (HHR) nylon
| in | mm | |
| Pitch | 0.50 | 12.7 |
| Minimum Width | 8 | 203 |
| Width Increments | 0.50 | 12.7 |
| Opening Sizes (approximate) | 0.87 × 0.30 | 22.1 × 7.6 |
| 0.66 × 0.30 | 16.8 × 7.6 | |
| Open Area | 48% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth upper surface with fully flush edges.
- The detectable material has surface resistivity per ASTM_D257 of 545 Ohms per square.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Rod diameter: 0.140 in (3.6 mm).
- Designed for a 0.5 in (12.7 mm) diameter nosebar.
| Belt Material | Default Rod Material, Diameter 0.14 in (3.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene | Polypropylene | 125 | 1,820 | 34 to 220 | 1 to 104 | 0.44 | 2.12 |
| Polypropylene | Acetal | 150 | 2,190 | 34 to 200 | 1 to 93 | 0.51 | 2.40 |
| PK | PK | 240 | 3,500 | -40 to 176 | -40 to 80 | 0.725 | 3.54 |
| HR nylon | Nylon | 175 | 2,550 | -50 to 240 | -46 to 116 | 0.58 | 2.83 |
| HHR nylon | HHR nylon | 175 | 2,550 | -50 to 310 | -46 to 154 | 0.58 | 2.83 |
| Acetal | Acetal | 240 | 3,500 | -50 to 200 | -46 to 93 | 0.73 | 3.56 |
| Detectable acetal | Acetal | 200 | 2,920 | -50 to 200 | -46 to 93 | 0.69 | 3.35 |
| Detectable polypropylene A22 | Acetal | 80 | 1,170 | 0 to 150 | -18 to 66 | 0.57 | 2.78 |
| X-ray detectable acetal1 | Acetal | 240 | 3,500 | -50 to 200 | -46 to 93 | 0.78 | 3.66 |
Designed specifically for detection by X-ray machines.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S1500_FlushGrid_FlushEdge_A_5inch_(Imperial).dxf | CAD Drawing | DXF | 3 MB |
| S1500_FlushGrid_FlushEdge_A_5inch_(Metric).dxf | CAD Drawing | DXF | 3 MB |
| S1500_FlushGrid_FlushEdge_A_7inch_(Imperial).dxf | CAD Drawing | DXF | 4 MB |
| S1500_FlushGrid_FlushEdge_A_7inch_(Metric).dxf | CAD Drawing | DXF | 4 MB |
| S1500_FlushGrid_FlushEdge_B_5inch_(Imperial).dxf | CAD Drawing | DXF | 2 MB |
| S1500_FlushGrid_FlushEdge_B_5inch_(Metric).dxf | CAD Drawing | DXF | 3 MB |
| S1500_FlushGrid_FlushEdge_B_7inch_(Imperial).dxf | CAD Drawing | DXF | 4 MB |
| S1500_FlushGrid_FlushEdge_B_7inch_(Metric).dxf | CAD Drawing | DXF | 4 MB |
| S1500_FlushGrid_Interior_4inch_(Imperial).dxf | CAD Drawing | DXF | 152 KB |
| S1500_FlushGrid_Interior_4inch_(Metric).dxf | CAD Drawing | DXF | 161 KB |
| S1500_FlushGrid_Interior_8inch_(Imperial).dxf | CAD Drawing | DXF | 284 KB |
| S1500_FlushGrid_Interior_8inch_(Metric).dxf | CAD Drawing | DXF | 300 KB |
| Solutions for Tortilla Processing Application Highlight | 2 MB |
