Ensure worker safety in wet environments with the Intralox Series 10000 Non Skid Perforated belt.
Part of the strongest modular plastic belting (MPB) series available, this belt features a diamond tread surface pattern that minimizes operator slippage risks. Its open slots reduce water carry-over in leak test applications, while its plastic construction eliminates issues associated with rust or corrosion.
- Functions without lubrication to mitigate contamination risks
- Available in high strength electrically conductive (HSEC) acetal
- Available with wheel chock attachments via S10000 Flat Top modules
| in | mm | |
| Pitch | 3.00 | 76.2 |
| Minimum Width | 5.9 | 150 |
| Maximum Width | 153.5 | 3900 |
| Width Increments | 0.98 | 25 |
| Opening Size (approximate) | 0.10 x 0.31 | 2.8 x 7.9 |
| Open Area | 3% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Fully flush edges have a Flat Top surface with no tread pattern.
- Open slots improve drainage. Diamond tread pattern provides a non-skid walking surface to increase safety.
- Available with yellow edges. Staggered yellow edges make it easy to distinguish the moving belt from the stationary floor.
- Slidelox are an acetal copolymer.
- Available in high strength electrically conductive acetal, which has a surface resistivity of 1,000 Ohms according to IEC 62631.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Wheel chocks are available. Use Series 10000 Flat Top modules to mount the wheel chocks.
- Flat Top indent: 1.97 in (50.0 mm) from edge of belt.
| Belt Material | Default Rod Material, Diameter 0.50 in (12.7 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Nylon | 10,000 | 146,000 | -50 to 200 | -46 to 93 | 6.48 | 31.64 |
| HSEC acetal | Nylon | 8,000 | 117,000 | -50 to 200 | -46 to 93 | 6.48 | 31.64 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| Series 10000 Belting Product Highlight | 2 MB | ||
| Series 10000 for EV and Battery Application Highlight | 525 KB |
